Adhesives OLON-600 Series - Pellets OLON-600 is a thermoplastic synthetic adhesive based on EVA - Elastomer, which is used in melted form as an edgebanding adhesive. The adhesive melts and flows very well offering a medium heat resistance and very good adhesive properties to: PVC, veneer and resin impregnated paper edgebanding. Typical Physical Properties Application and Handling | Adhesive type | Ethylene Vinyl Acetate (EVA) | | Viscosity (Thermosel) | 60,000 ± 15,000 cPs at 204°C(399°F) | | Ring and ball soft point | 90°C to 100°C (194°F to 221°F) | | Specific gravity | 1.42 ±0.02gr/ml | | Odor at 169 ° C | Mild | | Speed of set | Fast | | Feet speed | M/Min. Roller: 18 - 60 M/Min (58 - 195 ft/minute) | | Feet speed | M/Min. Roller: 12 - 25 M/Min (39 - 81 ft/minute) | | Color | White, natural, brown, black | | Surface Track | None | | Typical application | Temperature: 190°C to 210°C (374°F to 410°F) | | Heat stability | Good | | Room and material | Temperature: 18°C to 22°C (64°F to 72°F) | | Wood moisture content | 8 - 10 % | | Freezing sensitivity | -10°C to -15°C (14°F to 5°F) - KBPS 73 | | Shelf life | Approximately 12 months | | Clean up | Heat, scraper. Paraffin wax flash point above 177°C | | Storage | Store at room temperature - close container | | Flash point | Cleveland Open Cup Method greater than 210°C (420°F) | OLON-210 Series - Cartridges OLON-210 is a thermoplastic synthetic adhesive based on EVA - Elastomer, which is used in melted form as an edgebanding adhesive. The adhesive melts and flows very well offering a medium heat resistance and very good adhesive properties to: PVC, veneer and resin impregnated paper edgebanding. Typical Physical Properties Application and Handling | Adhesive type | Ethylene Vinyl Acetate (EVA) | | Viscosity (Thermosel) | 70,000 - 120,000 cPs at 210°C to 190°C (410°F to 374°F) | | Ring and ball soft point | 1000°C to 110°C (212°F to 230°F) | | Specific gravity | 1.42 ±0.02gr/ml | | Odor at 169 ° C | Mild | | Speed of set | Fast | | Feet speed | M/Min. Roller: 18 - 60 M/Min (58 - 195 ft/minute) | | Feet speed | M/Min. Roller: 12 - 25 M/Min (39 - 81 ft/minute) | | Color | White, natural, brown, black | | Surface Track | None | | Typical application | Temperature: 190°C to 210°C (374°F to 410°F) | | Heat stability | Good | | Room and material | Temperature: 18°C to 22°C (64°F to 72°F) | | Wood moisture content | 8 - 10 % | | Freezing sensitivity | -10°C to -15°C (14°F to 5°F) - KBPS 73 | | Shelf life | Approximately 12 months | | Clean up | Heat, scraper. Paraffin wax flash point above 177°C | | Storage | Store in cool, dry conditions (15°C to 25°C / 58°F to 77°F) | | Flash point | Cleveland Open Cup Method greater than 210°C (420°F) |
|
Print this page